Elettrovalv. Buschjost 8240214.9101.0245 G1/2,3,8m³/h,0,1-16bar +110°C,EPDM,24VAC 8240214.9101.0245
Compact solenoid valve with closing damping and EPDM seal for water, hot water and vapour. The valve is actuated indirectly and requires a minimal differential pressure for opening. It provides a high...
Tutte le informazioni sul prodotto
VDE
CE
Compact solenoid valve with closing damping and EPDM seal for water, hot water and vapour. The valve is actuated indirectly and requires a minimal differential pressure for opening. It provides a high flow rate, is resistant to pressure and has a lower power consumption than directly activated solenoid valves.
Per ulteriori informazioni consultare Download
| Codice OEG | 113124230 |
| Model: | Pilot-controlled |
| Type: | 2-way valve |
| Valore KVs [m³/h]: | 3,8 |
| Grandezza del raccordo: | 1/2" FF |
| Temperatura liquido [°C]: | -5 .. 110 |
| Tipo di guarnizione: | EPDM |
| Temperaturaambiente [°C]: | -10 .. 50 |
| Durata di funzionamento: | 100% |
| Viscosity: | 0 .. 25 mm²/s |
| Opening characteristics: | Normally closed (NC) |
| Pressione di funzionamento [bar]: | 0,1 .. 16 |
| Pressione differenziale [bar]: | 0,3 .. 2 |
| Medium : | Water, Hot water, Vapour |
| Tension: | 24V AC |
| Produttore | Buschjost |
| Numero di produttore | 8240214.9101.0245 |
| Peso [kg] | 1,3 |
| Avvisi |
VDE
CE
|
| Codice doganale | 84818087 |
Was ist der Unterschied? Baureihe 82400 "vorgesteuert mit differenzdruck" und Baureihe82540 "zwangsgesteuert"
Vorgesteuert Magnetventile brauchen zwingend einen minimalen Druckunterschied zwischen vor- und hinter dem Ventil. Daher solch Angaben wie 0.3 bis 16 bar. Liegt nur 0,2bar an schaltet es nicht sauber.
Diese Membran-Magnetventile sind meist günstiger im Vergleich zu "zwangsgesteuerten" Ventilen.
In geschlossenen Kreisläufen (Heizkreis usw.) kommen meistens nur "zwangsgesteuerte" Ventile zum Einsatz.
Per poter fare la domanda deve prima effettuare il login
25/01/17, 14:04:06 da: Signor Feld
gut
Der Einbau ist relativ einfach
