Stai utilizzando un browser obsoleto. Si prega di aggiornare il browser per visualizzare correttamente la pagina.
Fresh-water storage tanks for the highest demands on drinking water hygiene and efficiency.
The structure of these storage tanks differs fundamentally from conventional, large-volume DHW storage tanks...
Tutte le informazioni sul prodottoFresh-water storage tanks for the highest demands on drinking water hygiene and efficiency.
The structure of these storage tanks differs fundamentally from conventional, large-volume DHW storage tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water and also serves as a powerful heat exchanger. This combines the advantages of a buffer storage tank with those of an instantaneous water heater.
The drinking water only passes through the corrugated stainless steel pipe in the water of the heated cylinder when required. This enables you to achieve very low energy consumption and guarantees your customers legionella-safe drinking water. You do not need a legionella protection programme in the control system. At all times, the consumer is provided with hygienically perfect, fresh water at the desired temperature.
The horizontal installation of horizontal fresh-water storage tanks allows you to use them in places that are not suitable for vertical cylinders (e.g. below sloping ceilings and stairs). This means that your customers can benefit from the advantages of a hygienic storage tank even where space is limited.
Compare! The horizontal arrangement of the heat exchangers in horizontal OEG fresh water storage tanks offers your customers advantages over other products on the market. Efficient heat stratification is only achieved by installing the heat exchangers horizontally. The generously dimensioned heat exchanger surfaces provide another energy advantage over other products available on the market.
Per ulteriori informazioni consultare Download
| Codice OEG | 516006336 |
| Colore: |
Silver |
| scambiatore di calore addizionale: | 0 |
| Tipo di installazione: | accumulatore orizzontale |
| Produttore | OEG |
| Marchio | Pure+ |
| EAN | 4055668000387 |
| Classe di efficienza energetica | A+ |
| ErP-Label |
|
| Avvisi | |
| Codice doganale | 84191900 |
| Capacità nominale a norma EN 12897: | 300 |
| Isolamento secondo la DIN 4102-1 con classe di protezione antincendio B2: | Pannello isolante espanso rigido |
| Peso [kg]: | 103 |
| Altezza totale con isolamento [mm]: | 700 |
| Larghezza [cm]Larghezza [mm]: | 610 |
| Lunghezza [mm]Lunghezza [cm]: | 1750 |
| Classe di efficienza energetica conforme al regolamento UE numero 812/2013: | A+ |
| Perdita termica secondo EN 12897 [W]: | 36 |
| Perdite di calore in stand-by secondo la norma EN 12897 [kWh/24h]: | 0,864 |
| Portata (45 °) [l]: | 175 |
| Coefficiente di resa termica a norma DIN 4708: | 1,60 |
| Volume effettivo conforme alla norma EN 12897 [l]: | 301 |
| pmax Serbatoio [bar]: | 3 |
| tmax Serbatoio [°C]: | 95 |
| tmin Serbatoio [°C]: | 20 |
| Scambiatore di calore per acqua potabile [m²]: | 2,50 |
| Scambiatore di calore per acqua potabile volume [l]: | 11 |
| pmax Scambiatore di calore per acqua potabile [bar]: | 6 |
| tmax Scambiatore di calore per acqua potabile [°C]: | 95 |
| Provvedimento di raccordi: | Fronte / retro |
| Raccordo sonda [Ø mm / morsetto]: | 6 mm |
| Attacchi per prelievo acqua calda/fredda: | Rp 1 1/4" |
| Raccordo generatore di calore [filettatura]: | R 1" |
| Raccordo resistenza elettrica [filettatura]: | Rp 1 1/2" |
| Riscaldatore a vite con profondità massima a immersione [mm]: | 700 |
De horizontale buffertanks zijn te vinden op pagina 19, inclusief de aansluitingen.
Zie download bij dit artikel - bedieningvoorschrift.pdf
Zoals door u omschreven is de boiler niet juist aangesloten.
Het vat wordt gevuld met verwarmingswater in een gesloten systeem.
De boiler heeft 1 stalen wisselaar voor glyco en 1 RVS wisselaar voor het tapwater.
Neem bij vragen s.v.p. contact op met onze verkoop.
Mocht een liggende boiler de enige mogelijkheid zijn kan beter worden gekozen voor de Accumulatore d'acqua fresca orizzontale 200 litri 2 scambiatori addizionali met twee extra buiswisselaars (gezien de warmteoverdracht van warmtepomp naar het opslagvat)
Door de twee wisselaars door te lussen ontstaat een groter warmtewisselaar-oppervlak wat nodg is voor een effectieve overdracht van een lage-temp. warmtebron. De RVS-wisselaar in de boiler is voor het tapwater.
In het vat zit bij dit model cv-water, in een gesloten systeem.
Hier zit een roestvrijstalen spiraal in om het tapwater te verwarmen.
Deze zijn m.b.t. gebruik met een warmtepomp, gelijk aan een staand model.
Beste lezer, heeft de horizontale uitvoering ook een spiraal voor solar of alleen een spiraal voor drinkwater? Vorige week voor een klant de set met vat 516008266 besteld, maar blijkt niet te passen. Horizontale versie (516006336?) lijkt de oplossing. Alvast bedankt voor de reactie. met vriendelijke groet, Geert van de Weijer
Hiervoor kunt u Accumulatore acqua fresca orizzontale 300 litri 1 scambiatore addizionale selecteren
Guten Tag,
der Behälter an sich, wird aus S235JRG2 gefertigt. Das Edelstahlwellrohr wird aus 1.4404 AISI-316 hergestellt. Dies wurde jedoch nicht in schriftlicher Form niedergeschrieben.
Mit freundlichen Grüßen
Guten Tag,
das Datenblatt ist im Reiter "Dokumente" hinterlegt
Mit freundlichen Grüßen
Hier adviseren wij uw een elektrische weerstand van 2kw tot max 3 kw
Dit vat wordt met een vaste PUR-schuim isolatie geleverd.
Wij kunnen echter vaten naar wens uitleveren.
In onze catalogus 2017/2018 vindt u op pagina 1128 het aanvraagformulier wat u hiervoor dient in te vullen.
U ontvangt dan z.s.m. van ons een offerte met prijs en levertijd