Double-pump oil supply unit for the pressure supply of oil burners or for the filling of day tanks. Smooth-running and durable thanks to high-quality components. The installation place of the unit should be in the vicinity of the tank...
All product information Scope of deliveryRelated products
Delivery by forwarding agency
Shipment on Sundays / bank holidays and delivery on the next working day is not possible for this item.
Double-pump oil supply unit for the pressure supply of oil burners or for the filling of day tanks. Smooth-running and durable thanks to high-quality components. The installation place of the unit should be in the vicinity of the tank. The unit has an oil sump pan for safety reasons.
| Scope of delivery: | |||
| 2 x | Internal gear pumps with safety valve | ||
| 2 x | Three-phase current standard motors | ||
| 2 x | Check valve | ||
| 2 x | ball valve | ||
| 1 x | Test pressure gauge | ||
| 1 x | Test vacuum gauge | ||
| 1 x | Oil sump pan | ||
| 2 x | heating oil filter | ||
For more information see Downloads
| OEG no. | 120543050 |
| Delivery rate [l/h]: | 300 |
| Motor power [kW]: | 0.18 |
| Pressure connection: | DN 15 |
| Suction connection: | DN 18 |
| Type: | Pump VBGP |
| Type of connection: | Thread |
| Length x Width x Height [mm]: | 800 x 500 x 400 |
| Pumped medium: | Heating oil EL |
| Operating pressure max. [bar]: | 9 |
| Manufacturer | OEG |
| Weight [kg] | 48.8 |
| Notes |
Delivery by forwarding agency
Shipment on Sundays / bank holidays and delivery on the next working day is not possible for this item.
|
| Customs tariff number | 84138100 |
What is the pump station SMGZ 300 suction height I need outgoing pressure only ~ 1 bar for oil ring
Ideally, under 4 m suction height. Depending on the hydraulics of the entire system, a maximum suction height of 6m can be achieved with a ring line system using gas-air separators (example GLAK 3/4, OEG gas/air separator with combined shut-off and ball valve). The pressure is regulated via an external valve just before the end of the ring line (on the tank), e.g. Pressure control valve 3/8" for 0.5 to 1.5 bar
Is this product avalibel for Biodiesel RME oil? OEG Twin ring line units SMGZ 300lit/hour
Good afternoon,
yes, the pump can be used for biodiesel
With kind regards