2/2 solenoid valves
Positively controlled
Closed in a de-energized state
Fields of application:
2/2 way solenoid valves of the series 43 can be used in closed circuits since the valves work without a pressure difference because of the...
Related products
2/2 solenoid valves
Positively controlled
Closed in a de-energized state
Fields of application:
2/2 way solenoid valves of the series 43 can be used in closed circuits since the valves work without a pressure difference because of the
positively controlled diaphragm. Typical fields of application are HVAC and general mechanical engineering.
Type of protection IP65. Installation only with upright magnets!
Delivered with connector plug.
Solenoid coils 012 / T012
012/T012 coils correspond to VDE 0580.
Power consumption: approx. 43/24 VA
Rel. duty time: 100 %
Operating voltage: +5 / -10 %
Possible coil voltages:
24 V =, 24 V, 42 V, 230 V ~ (50 Hz + 60 Hz)
Media: Air, water, neutral gases
Temperature: -10 - +90°C
Seal material: NBR
Media: Water, hot water, vapour
Temperature: -10 - +130°C
Seal material: EPDM design-TM
Media: Oil (also synthetic), fuel
Temperature: -10 - +100°C
Seal material: FKM
Ambient temperature: -10°C / +35°C
Viscosity: max. 22 mm²/s-1
Burst pressure: > 60 bar
For more information see Downloads
| OEG no. | 113123220 |
| Weight [kg] | 1.5 |
| Customs tariff number | 84818087 |
Beste OEG, Wij willen deze magneetklep (en ook de ½ "en 1"uitvoering) gaan toepassen op onze branders. De klep heeft de functie om na de pomp als extra veilighieds klep te functioneren.De klep gaat gelijktijg open met het starten van de oliepomp.De druk die de oliepomp geeft is 16 bar.Kunnen wij deze klep op deze wijze toepassen ?
De kleppen zijn alleen geschikt tot maximaal 10 bar. Als de magneetklep echter voor de oliepomp in de olieleiding wordt geplaatst, kan dit zo worden gemonteerd.
You have to be logged in to ask a question
23/01/2017, 14:35:55 of: Mr Feld
gut
Die Magnetventil von GSR sind sehr zuverlässig
