Solar absorber complete set up to 48 m² water surface

OEG no.: 650001191
  • 24
Zoom Solar absorber complete set up to 48 m² water surface
OEG no. : 650001191

Enjoy the summer time in your own pool - little effort, low costs and maximum gain! Using solar energy when heating swimming pools is particularly inexpensive. Benefit from the solar absorber complete...

All product information Scope of delivery
Related products
Wipe 'n' Buy ®
Wipe 'n' Buy

Enjoy the summer time in your own pool - little effort, low costs and maximum gain! Using solar energy when heating swimming pools is particularly inexpensive. Benefit from the solar absorber complete set for pools with a water surface of up to 48 m². This absorber system is easy to install and ready-to-use in no time.

Flat and tilted roof areas and lawns are suitable for the arrangement of the plastic absorbers. Completely made of plastic, they have the advantage of being operated in a single-circuit system. The chlorinated pool water can directly flow through the absorbers without system separation by means of a corrosion-resistant circulation pump or by the already existing circulation pump.


Scope of delivery:
1 xPVC elbow 45°
1 xPVC ball valve
2 xAdhesive for PVC
12 x Solar absorber side element with 2 couplings and 1 collecting pipe
12 x Solar absorber middle element with 4 couplings
12 x Solar connection hose with 2 stainless steel hose clamps
36 x Solar absorber connection piece 25 mm
1 x Solar connection kit for PVC piping
1 x Solar vent set PVC tubing DN50
1 x Solar drain kit PVC tubing DN50
1 x T-piece 90° reduced 50 x 25 x 50 mm
1 x Reducer 25 mm x 1/2
1 x T-piece 45° Ø 50 mm
1 x PVC dirt filter Ø 50 mm sieve 1.8 mm with plastic sieve tube
1 x OKU Suncontrol diff. temp. controller compl. with 2 sensors + immersion sleeve
1 x Three-way ball valve Solar PVC Ø 50 mm with electric actuator 230 V

For more information see Downloads


OEG no. 650001191
Flow rate: 150 up to 250 l m²/h
Surface: 48 m²
Temperature resistance [°C]: -50 .. 115
Operating pressure [bar]: 0 .. 1.2
Efficiency [%]: 85
Test pressure [bar]: 4.5
Property: Supports human weight
Load-bearing capacity: 400 kg
Number of collectors: 24
Pool capacity [m³]: 48
Absorber surface: 25.56‬ m²
Weight [kg] 0.01
Customs tariff number 84191900 (EEC)
en
Question:

Können die im Winter liegen bleiben?

Answer OEG:

Da es sich um ein Leerlaufsystem handelt, ist es nicht notwendig die Anlage in den Winterminaten abzubauen. Wichtig ist nur darauf zu achten, das kein Poolwasser in der Anlage ist.

You have to be logged in to ask a question

Average customer assessment
Bewertungen
en 05/05/2016, 18:09:53 of: Mr Breitenbach

Produkt hält was es verspricht

Die Anlage wurde von unserer Firma auf einem Campingplatz montiert. Der Pool hat eine Oberfläche von ca. 45m², eine externer Wärmeerzeuger war nicht angeschlossen. Pool wurde auf Grund der Kälte oft nicht genutzt. Mit den neuen Absorbern klappt die Beheizung ganz gut, oft hatte das Wasser eine Temperatur von über 30°C.

In order to give a review, you have to be logged in.