Single-line suction pump unit for pumping the heating oil from the tank to one or several burners. The set-up location of the unit is selected in the vicinity of the burners so that they can remove...
All product information Scope of deliveryRelated products
TÜV Rheinland
Delivery by forwarding agency
Shipment on Sundays / bank holidays and delivery on the next working day is not possible for this item.
Single-line suction pump unit for pumping the heating oil from the tank to one or several burners. The set-up location of the unit is selected in the vicinity of the burners so that they can remove the calmed oil from the vessel via six individual ports.
The unit generates a vacuum of -0.95 bar and, thus, achieves a maximum delivery head of 9.5 m vertically at a possible distance of 200 m horizontally. An overfill protection device and the oil sump pan with leak detector provide for the necessary safety. The fill level protection guarantees dry-running protection. The control unit used offers extensive control options with potential-free operating and fault-message outputs as well as with an event memory.
| Scope of delivery: | |||
| 1 x | single-motor suction unit | ||
| 4 x | transport bracket for floor mounting | ||
| 1 x | Fastening material | ||
| Spare parts: | |||
|
PST AC 1.0 pump control unit | ||
|
Terminal base for OEG control AC 1.0 | ||
|
Cover strip 2 pcs. for OEG control AC 1.0 | ||
|
Float switch with overflow protection EVF-80/50V000-1TFL175-SB0,6PVCSt-WHG | ||
|
Float switch leakage new series BVF-80/55-V0-L60-SB-0,8PVC-WHG | ||
|
Internal gear pump BGP-DC | ||
|
Coupling for motor with pump flange 0.25 and 0.37 kW | ||
|
Motor with pump flange, coupling, screws, 4000 V, for ½'' pumps | ||
|
Solenoid valve GSR E 4323/1002/.012 1/2" 230V | ||
For more information see Downloads
| OEG no. | 120100230 |
| Type: | SE 600 |
| Burner capacity max. [kW]: | 4,600 |
| Output max. [l/h]: | 600 |
| Pipe diameter [mm]: | 22 .. 28 |
| Suction connection: | 3/4" |
| Voltage [V]: | 400 |
| Plug type: |
 CEE plug 
|
| Motor power [kW]: | 0.37 |
| Length x Width x Height [mm]: | 700 x 400 x 730 |
| Pumped medium: | Heating oil EL |
| Number of motors: | 1 |
| Speed [rpm]: | 2,800 |
| Housing: | Steel sheet powder-coated |
| Manufacturer | OEG |
| Weight [kg] | 60 |
| Notes |
TÜV Rheinland
Delivery by forwarding agency
Shipment on Sundays / bank holidays and delivery on the next working day is not possible for this item.
|
| Customs tariff number | 84136039 |
Sehr geehrte Damen und Herrn, Wir wollen am Saugaggregat SE600 den Brenner mit einem kurzen Zweistrangsystem anschließen. Was ist der maximale Rücklaufstrom den das Förderaggregat/Behälter bewältigen kann? Viele Grüße Stefan
Das Saugpumpenaggregat ist nur für ein Einstrangsystem geeignet und es muss sichergestellt werden, das kein Heizöl in den Betriebsbehälter des Aggregates zurücklaufen kann.
Sehr geehrte Damen und Herren, bitte um kurze Angabe welcher Art die Überfüllsicherung Ihres SE600 ist. Hat diese eine Zulassung nach WHG bzw. eine allgemeine bauaufsichtliche Zulassung des DIBt? Mit freundlichen Grüßen Christian Hammer Haustechnik Albert GmbH (Kundennummer: 30451) Vettermannstraße 1-3 08132 Mülsen
Guten Tag,
die Überfüllsicherung ist der Artikel Float switch with overflow protection EVF-80/50V000-1TFL175-SB0,6PVCSt-WHG. Die angefragte Zulassung wird zeitnah im Artikel (Downloads) hinterlegt.
Mit freundlichen Grüßen
