Single-line suction pump unit for pumping the heating oil from the tank to one or several burners. The set-up location of the unit is selected in the vicinity of the burners so that they can remove...
All product information Scope of deliveryRelated products
TÜV Rheinland
Delivery by forwarding agency
Shipment on Sundays / bank holidays and delivery on the next working day is not possible for this item.
Single-line suction pump unit for pumping the heating oil from the tank to one or several burners. The set-up location of the unit is selected in the vicinity of the burners so that they can remove the calmed oil from the vessel via six individual ports.
The unit generates a vacuum of -0.95 bar and, thus, achieves a maximum delivery head of 9.5 m vertically at a possible distance of 200 m horizontally. An overfill protection device and the oil sump pan with leak detector provide for the necessary safety. The fill level protection guarantees dry-running protection. The control unit used offers extensive control options with potential-free operating and fault-message outputs as well as with an event memory.
| Scope of delivery: | |||
| 1 x | Fastening material | ||
| 1 x | single-motor suction unit | ||
| 4 x | transport bracket for floor mounting | ||
| Spare parts: | |||
|
Float switch with overflow protection EVF-80/50V000-1TFL175-SB0,6PVCSt-WHG | ||
|
Filter 3/8", single line | ||
|
PST AC 1.0 pump control unit | ||
|
Terminal base for OEG control AC 1.0 | ||
|
Pump, 120 l, Suntec, AE 97 D 7355 2 P | ||
|
Float switch leakage new series BVF-80/55-V0-L60-SB-0,8PVC-WHG | ||
|
Coupling | ||
|
Vacuum gauge R 1/4" axial from -1 to 0 bar | ||
For more information see Downloads
| OEG no. | 120100210 |
| Voltage [V]: | 230 |
| Type: | SE 120 |
| Pipe diameter [mm]: | 12 .. 15 |
| Suction connection: | 3/8" |
| Plug type: |
 Plug with earthing contact 
|
| Motor power [kW]: | 0.09 |
| Burner capacity max. [kW]: | 1,200 |
| Length x Width x Height [mm]: | 415 x 280 x 600 |
| Output max. [l/h]: | 120 |
| Pumped medium: | Heating oil EL |
| Number of motors: | 1 |
| Speed [rpm]: | 2,800 |
| Housing: | Steel sheet powder-coated |
| Manufacturer | OEG |
| Weight [kg] | 20 |
| Notes |
TÜV Rheinland
Delivery by forwarding agency
Shipment on Sundays / bank holidays and delivery on the next working day is not possible for this item.
|
| Customs tariff number | 84136039 |
J'ai un brûleur de 540 Kw, une longueur de tuyauterie de 70 ml et une hauteur d'aspiration de 6.00 ml, quel matériel je dois choisir ?
remplissez le formulaire de demande prévu à cet effet
Dieses Saugaggregat haben wir von Euch berechnen lassen und installiert in Kom. Wetzel. Heute bekam ich die Nachricht, daß die Backöfen für die das Aggregat arbeitet, nicht gleichmäßig "saugen" soll. Am Gerät "hängen" jetzt 3 Backöfen a 80 kW und ist ausgerechnet für 4 Backöfen. Ich fahre morgen an die Anlage. wo kann ich sehen, wieviel Öl angesaugt wird ? mfg thw
Sehr geehrter Herr Werner,
4 x 80 kW sind ca. 32 l/h, das Aggregat ist mit Q = 120 l/h also ausreichend konzipert.
Bezüglich genauerer Anlagenparameter, z.B. Saughöhe, Leitungsdurchmesser, Leitungslängen, Leitungsverlauf, Bögen etc. setzt sich ein Techniker mit Ihnen in Verbindung.
You have to be logged in to ask a question
12/12/2014, 15:18:29 of: Mr Lautenbacher
sehr zuverlässig hat sich immer bewährt
Ein sehr gutes produkt sind voll zufrieden
