Pressure-compensation unit 20800

The pressure compensation unit is used to limit pressure increases in closed pipe sections resulting from volume expansion caused by temperature changes. The unit is suitable for fuel oil pipe sections which are closed at both ends (e.g. by means of solenoid or non-return valves) and which are subject to considerable temperature differences (e.g. due to oil pipe heaters).

A maximum of 725 cm ³ can be buffered at a temperature difference of 40 °C.

This corresponds to a max. cable length depending on the cable diameter:

- max. 25.5 m cable length with 8 x 1 mm cable diameter
- max. 14 m cable length with 10 x 1 mm cable diameter
- max. 9 m cable length with 12 x 1 mm cable diameter

ter

Suitable for:
	Single suction unit 1,200 kW with safety plug
	Single suction unit 1,800 kW with safety plug
	Single suction unit 600 kW with shock-proof plug
	Single suction unit 600 kW with Swiss plug
	Single suction unit 1,200 kW with Swiss plug
	Single suction unit 1,800 kW with Swiss plug

For more information see Downloads