Mounting plate straight with 2 wall plate elbows passage 16 mm x 1/2" IT Contour TH

Straight mounting plate with pre-assembled wall plate elbows for easy installation of pipes in masonry. The wall plate elbows have a drain to the front and additionally a V-shaped inlet and outlet for loop-through of the drinking water. The tabs of the metal plate are mounted to the wall directly next to the area prised open; this results in a fixed installation depth of the wall plate elbows. The depth of the opened area can, therefore, be coarse as long as it is deeper than the installation depth of the elbow. This saves time during the installation.

The SilverTec® fitting allows for a quick assembly with maximum safety. Due to the forced leakage, unpressed joints can be already located reliably during the pressure test - the fitting is leaky when unpressed in the dimensions 16-32 mm.
The very good resistance coefficient (Zeta) guarantees low pressure loss. While in operation, hardly any flow noises occur. 3 control windows are used for a simple check of the insertion depth and provide for safety during the installation.
The fitting complies with the UBA positive list and fulfills the requirements of the drinking water ordinance. It has a multi-contour and is completely compatible with TH pressing jaws. It is also compatible with pressing jaws of contour U up to the dimension 32 x 3 mm.

Scope of delivery:
2 x	Press fitting double wall plate female coupling 16 mm x 1/2"IT x 16 mm TH contour

For more information see Downloads