You are using an outdated browser. Please update your browser now to display the page correctly.
Hydraulic separator for decoupling the heat source from the consumer circuits in a hot-water heating. The hydraulic separation avoids mutual interference of the circulation pumps.
All product information Scope of delivery
Hydraulic separator for decoupling the heat source from the consumer circuits in a hot-water heating. The hydraulic separation avoids mutual interference of the circulation pumps.
Scope of delivery: | |||
1 x | hydraulic separator | ||
1 x | prefabricated insulation |
For more information see Downloads
OEG no. | 512245722 |
Type: | WS 60/50 |
Type: | Hydraulic separator |
Volume flow [m³/h]: | 3 |
Connection size: | 1" IT |
Connection: | 1/2" sleeves for venting, draining and sensors |
Wall thickness [mm]: | 2.5 |
Inside micrometer [mm]: | 280 |
Dimensions H x W x D [mm]: | 450 x 60 x 50 mm |
Insulation: | 30 mm EPP foam |
Operating pressure max. [bar]: | 4 |
Warranty [years]: | 3 |
Operating temperature max. [°C]: | 110 |
Manufacturer | OEG |
Also replaces |
|
Weight [kg] | 3.9 |
Customs tariff number | 73269098 |
En principe, tous les doigts de gant d'une longueur de 35 mm à 85 mm et doté d'un raccord 1/2".
Par exemple, Immersion sleeve THMs/50, EL 50 mm nickel-plated brass ou Immersion sleeve THV/50, EL 50 mm stainless steel V4A pourraient éventuellement convenir, dans la mesure où cela correspond à la sonde existante.
Goedemiddag, de kW wordt bij hydraulische verdelers nooit opgegeven. Hier is altijd de volumestroom de bepalende factor. Indien u hier meer vragen over hebt, aarzel niet om contact op te nemen.
Guten Morgen,
1" Innengewinde sind die Anschlüsse
und 1/2" fürFühlerundEntleerung
passende Wandbefestigung Art.Nr. Wall mounting set 60/50