Hot water storage tank 150 litres with 1 smooth pipe heat exchanger
Hot-water storage tanks for heating up domestic water by means of boilers and low-temperature systems of all manufacturers.
The inner surface of the storage tank is coated with a high-quality enamelling...
Delivery by forwarding agency
High Quality
10-year warranty
TÜV Rheinland
Hot-water storage tanks for heating up domestic water by means of boilers and low-temperature systems of all manufacturers.
The inner surface of the storage tank is coated with a high-quality enamelling. The generously dimensioned heat exchanger surface that reaches down to the bottom ensures excellent heat transmission. A laterally positioned service hatch makes it possible to maintain and clean the storage tank conveniently, and it can be fitted with an electric heating element if required. The unrivalled OEG vacuum insulation of the storage tanks ensures there are significantly lower heat losses than the insulations of customary storage tanks.
| Spare parts: | ||
|
Magnesium anode Ø 33 x 500 mm 1 1/4" screw-in thread | |
|
Sealing disc EPDM for service hatch | |
For more information see Downloads
| OEG no. | 516008002 |
| Installation type: | Vertical storage tank |
| Manufacturer | OEG |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Delivery by forwarding agency
High Quality
10-year warranty
TÜV Rheinland
|
| Customs tariff number | 84191900 |
General
| Colour: | red |
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 70 |
| Total height including insulation [mm]: | 1020 |
| Diameter with insulation [mm]: | 610 |
| Tilt height [mm]: | 1170 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 28 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,672 |
| Output capacity (45°C) [l]: | 236 |
| Performance indicator NL following DIN 4708: | 2,50 |
| TÜV certificate ID: | 0000080165 |
| Real volume according to EN 12897 [l]: | 154 |
| pmax Tank [bar]: | 10 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| Smooth-pipe heat exchanger [number]: | 1 |
| Smooth-pipe heat exchanger area bottom [m²]: | 1,15 |
| Smooth-pipe heat exchanger volume bottom: | 7,50 |
| pmax Smooth-pipe heat exchanger [bar]: | 10 |
| tmax Smooth-pipe heat exchanger [°C]: | 130 |
| Connection layout: | 180° |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | R 1" |
| Connection heat exchanger [thread]: | Rp 1" |
| Connection circulation: | R 3/4" |
| Connection heating element [thread]: | inspection flange |
| Service hatch (LK 150): | 115 / 180 |
| Max. immersion depth of flange heater [mm]: | 420 |
Deze kan gebruikt worden als boiler voor sanitair warm water?
Goedemorgen,
Deze boiler is van binnen geëmailleerd en kan daarom gebruikt worden als drinkwater-opslagtank. Kijk voor meer info over gebruik en onderhoud, in de installatie- en bedieningsinstructies (deze kunt u in de downloads vinden)
bonjour ayant installé ce produit et pris une resistance électrique en plus expliquez moi comment la mettre ? faut il remplacer la bride,donc référence de cette dernière ? pourtant dans le descriptif aucune modif n4est signalée.merci olivier.
Il faut placer la resistance à la trappe de visite. Vous pouvez commander une resistance déjà pourvue du joint et de la bride ou commander separement ces deux pieces.