Horizontal Fresh-Water Storage Tank 400 litres
Fresh-water storage tanks for the highest demands on drinking water hygiene and efficiency.
The structure of these storage tanks differs fundamentally from conventional, large-volume DHW storage tanks...
All product information
Delivery by forwarding agency
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
10-year warranty
Fresh-water storage tanks for the highest demands on drinking water hygiene and efficiency.
The structure of these storage tanks differs fundamentally from conventional, large-volume DHW storage tanks. A built-in corrugated stainless steel pipe separates the drinking water from the heating water and also serves as a powerful heat exchanger. This combines the advantages of a buffer storage tank with those of an instantaneous water heater.
The drinking water only passes through the corrugated stainless steel pipe in the water of the heated cylinder when required. This enables you to achieve very low energy consumption and guarantees your customers legionella-safe drinking water. You do not need a legionella protection programme in the control system. At all times, the consumer is provided with hygienically perfect, fresh water at the desired temperature.
The horizontal installation of horizontal fresh-water storage tanks allows you to use them in places that are not suitable for vertical cylinders (e.g. below sloping ceilings and stairs). This means that your customers can benefit from the advantages of a hygienic storage tank even where space is limited.
Compare! The horizontal arrangement of the heat exchangers in horizontal OEG fresh water storage tanks offers your customers advantages over other products on the market. Efficient heat stratification is only achieved by installing the heat exchangers horizontally. The generously dimensioned heat exchanger surfaces provide another energy advantage over other products available on the market.
For more information see Downloads
| OEG no. | 516006340 |
| Colour: |
 Silver 
|
| Additional heat exchanger: | 0 |
| Recommended max. number of persons for DHW: | 8 |
| Installation type: | Horizontal storage tank |
| Manufacturer | OEG |
| Brand | Pure+ |
| EAN | 4055668000424 |
| Energy efficiency class | A+ |
| ErP-Label |
|
| Notes |
Delivery by forwarding agency
High Quality
Clean fresh water generation in corrugated stainless steel pipe with flow heater principle
10-year warranty
|
| Customs tariff number | 84191900 |
General
| Insulation according to DIN 4102-1 Fire Protection Class B2: | solid foamed insulation |
| Weight [kg]: | 123 |
| Total height including insulation [mm]: | 850 |
| Width [mm]: | 760 |
| Length [mm]: | 1600 |
| Energy efficiency class according to EU regulation no. 812/2013: | A+ |
| Heat retaining loss according to EN 12897 [W]: | 41 |
| Heat losses in stand-by mode according to DIN 12897 [kW/h / 24 h]: | 0,984 |
| Output capacity (45°C) [l]: | 230 |
| Performance indicator NL following DIN 4708: | 2 |
| Real volume according to EN 12897 [l]: | 455 |
| pmax Tank [bar]: | 3 |
| tmax Tank [°C]: | 95 |
| tmin Tank [°C]: | 20 |
| DHW heat exchanger area [m²]: | 5,10 |
| DHW heat exchanger volume [l]: | 23 |
| pmax DHW heat exchanger [bar]: | 6 |
| tmax DHW heat exchanger [°C]: | 95 |
| Connection layout: | front/rear |
| Connection sensor [Ø mm / terminal]: | 6 mm |
| Connection cold / hot water: | Rp 1 1/4" |
| Connection heat generator [thread]: | R 1" |
| Connection heating element [thread]: | Rp 1 1/2" |
| Max. immersion depth of screw-in heater [mm]: | 1050 |